Using the latest CO2 laser cutting solutions, n-Deavor is able to realise your projects on a wide variety of materials, including but limited to:
- Plastics:
- Acrylic / Perspex – up to 10mm thick as standard
- Polycarbonate (Lexan) – up to 0.5mm thick
- Polyester (Mylar) – up to 1mm thick before there can be warping issues
- Polypropylene – thinner is better
- Delrin – great structural material for jigs, fixings and component parts
- Gravoply / Rowmark – these are laminated materials with the top later engraved to reveal the lower substrate. Easy to then cut the required profile. Typically up to 1.5mm thickness
- PVC and Teflon: Sorry but it is not safe to cut these materials with a laser as they contain Chlorine & Fluorine respectively.
- Flexible Magnetic Sheets – These cut great with a laser, but get a data sheet to determine the material composition as they can contain Chlorine.
- Wood – typically it is possible to up to about 12mm thick depending on material density.
- All hard and soft woods
- MDF
- PLY
- Bamboo
- Balsa
- Wood Laminates
- Foams – up to 25mm thickness
- High density foams are best
- Fabrics – most fabrics cut well with the cut heat sealed.
- Leather – up to about 4mm thick (smells terrible by the way)
- Rubber – Certain rubbers will cut when thin, but get a data sheet to determine the material composition as they can contain Chlorine.
Applications
- Industrial Labels
- Tags
- Facias
- Decals
- Personalised Products
- Rating Plates
- Logos
- Gift products
- Awards and plaques